Surface-Mount Satellite Speaker for Subwoofer-Satellite Loudspeaker System
The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a low distortion 60 mm (2.5 in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex® former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis. For full-range wide-bandwidth performance, either 2 or 4 Control 52P mid-high speakers can be driven from the Control 50S/T pendant subwoofer (or from a Control 60PS/T pendant or Control 40CS/T in-ceiling subwoofer). The crossover for this subwoofer-satellite system is included in the subwoofer, and the system can be driven either low-impedance or from a 70V/100V distributed speaker line.
- Stylish, unobtrusive design Fits into a wide variety of decors
- High fidelity sound Low distortion 60 mm (2 1/2 in) driver, which features a secondary bucking magnet for high efficiency
- Selectable 70V/100V For distributed lines, or low impedance
- Versatility For either two or four satellite speakers per system
- Ability to mix and match With Control Contractor40 Series in-ceiling models
- Wall-mount brackets included
Frequency Range (-10dB) |
140 Hz - 20 kHz |
Frequency Response (±3 dB) |
180 Hz - 17 kHz |
Power Rating |
50 Watts Continuous Program Power (2 hrs) ; 25 Watts Continuous Pink Noise (2 hrs) ; 30 Watts Continuous Program Power (100 hrs) ; 15 Watts Continuous Pink Noise (100 hrs) |
Sensitivity |
85 dB (4.0V/1m = 1W), 82 dB (2.83V, 1m) |
Coverage Angle |
Omnidirectional |
Maximum SPL (1m) |
94 dB average, 100 dB peak |
Impedance |
16 ohms |
Drivers |
60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex® former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension |
Input Connectors |
Removable locking 2-pin connector with screw-down terminals. Max wire 12 AWG (2.5 mm) |
Enclosure |
High impact polystyrene, painted zinc-plated metal grille |
Included Accessories |
Wall bracket (both speaker and wall parts), 2-pin locking connector. |
Grille |
Zinc-plated steel |
Mounting Hardware |
Included wall swivel ball bracket |
Optional Accessories |
Wall-mount ball-type bracket |
Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.